T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 95 / 200

93
Quick Start Voice over IP (VoIP)
■
Operation of SIP-capable telephony software (see also SIP Telephony starting on page 104)
■
TC system networking using Q.SIG-IP via VPN connections (see also PBX Networking starting on
page 119)
Integrating voice and data communication within the Intranet can provide savings possible and a range of
new possibilities. However joint usage of existing network infrastructure may also cause conflicts, with IP
address configuration via DHCP for example (for details see Start Procedure starting on page 112). You
should therefore always plan the use of VoIP in the Intranet together with your network administrator. In order
to avoid possible conflicts please also note the information under Fundamentals starting on page 97.
Quick Start
IP System Telephony
VoIP system telephony can be quickly and easily set up using the Comfort Pro S.
1. Optional: install a Comfort Pro IF MGC VoIP media gateway card in slot 2 to enhance VoIP.
2. Call up the Configurator and go to the page Telephony : Ports : Slots . Click on the corresponding slot.
Under Configured, select MGC VoIP. Optional: enter an IP address from the Comfort Pro S IP network
which is not being used, such as 192.168.99.253 under IP Address Configured . Click on Apply .
3. Go to the page Telephony : Devices : VoIP Telephone and click on New . Enter the MAC Address printed
on the underside of the IP system telephone. Select the Type and enter an internal Number . Option: enter
an IP address from the Comfort Pro S IP network which is not being used. Click on Apply .
4. Connect the IP system telephone’s LAN connection to the LAN and connect the phone to the mains
power. If you wish to use Power-over-Ethernet for power supply call up the Network : LAN page. Click on
Change . Activate the PoE option for the LAN port that the IP system telephone is connected to.
Once your IP system telephone has been successfully started, you can set it up and use as you would any
other U
pn
-based system telephone.
N
Note: Use a shielded CAT-5 Ethernet cable (STP cable, Shielded Twisted Pair cable) to
connect an IP telephone to a Local Area Network (LAN).