T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 74 / 200

72
Configuration Configuring the Comfort Pro S
Saving and Loading the Configuration
Configurations are saved in a file archive and can be loaded to the Comfort Pro S either locally from a
connected configuration PC, or by remote configuration. The following configuration and customer data can
be saved and loaded again:
■
Telephony and network parameters
■
User data
■
Telephone book entries
■
LCR tables
Note, that for security considerations the passwords for external SIP trunks are not re-established if you
restore a data backup from another (foreign) communication system. For further information, refer to the
online help documentation under the topic System: Data backup .
Remote Configuration
The Comfort Pro S configuration can be edited or updated by the Deutsche Telekom service centre via a
remote access connection or via an Internet connection (reverse ssh tunnel). The prerequisite for this is that
access for remote configuration for the Deutsche Telekom service centre is activated in the Comfort Pro S.
Please contact the technical service for further information.
Connection via ISDN
The connection for remote configuration is established using an internal RAS access. The RAS access is
activated when a data call from one of the registered phone numbers is registered. During remote
configuration, the Comfort Pro S is blocked for RAS access by any further users.
If no RAS access has been configured in the Comfort Pro S Configurator, you can use a code procedure to
release the internal RAS access for remote configuration, and then block it again. The manual activation is
automatically cancelled 30 minutes after the last configuration activity. You can add additional phone
numbers for remote configuration on the configurator’s Telephony : Extended : Remote service menu page.
Activate the ISDN option for the desired phone numbers.