T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 38 / 200

36
Installation Interface Cards
Installing a Fax/V.24 Card
Comfort Pro S’s Fax/V.24 slot
Comfort Pro S has a small slot for a special Fax/V.24 card. You can see the position of this slot in the adjoining
diagram. The Fax/V.24 card is available in the following combinations:
■
V.24 card
■
Combined Fax/V.24 card
To install the Fax/V.24 card, perform the following steps:
1. Switch off the Comfort Pro S. Open the cover (see Opening and Closing Comfort Pro S starting on
page 30).
2. To discharge, touch a radiator or another metallic installation connected to earth ground. Take the
interface card out of its packaging. Check that it is the correct type of card. There is a label specifying the
type on the connector.
Caution!
Static charges can damage the Comfort Pro S’s electronic components so you must
provide potential equalisation between you and the system. Hold the edge of the
interface card with one hand. With the other hand briefly touch the capacitor on the
board (see diagram on page 34).
handle only here
handle only here
socket