T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 157 / 200

155
Examples of Use Team Functions
Call numbers 11 and 10 are both configured as a trunk key on the executive’s and the secretary’s terminal
respectively. Thus the executive and the secretary can use either call number (for answering as well as
making calls). Each can act as a substitute for the other.
The secretary’s terminal also has the executive’s call number configured as a direct call number (DK 10:
executive’s office). The secretary can therefore reach the executive and put through calls even if the executive
has programmed a substitute.
Line Busy Indication
If a line is busy, e.g. TrK 11 secretary’s office, the other terminal will indicate this. The executive’s private calls
via TrK 12 are not indicated on the secretary’s terminal since no appropriate trunk key is configured on the
latter’s telephone.
Call Signalling
In this configuration example, calls to one’s own call number are signalled acoustically on the following
telephones:
■
Call number 11 on the secretary’s telephone
■
Call numbers 10 and 12 on the executive’s telephone.
Calls for the other team member’s call number are indicated by an optical signal on one’s own telephone
(flashing trunk key LED).
The parallel telephone will indicate calls only by an optical signal.
Time-delayed acoustic signalling can be configured for TrK 10 on the secretary’s telephone. If the executive,
for example, does not answer a call within 10 seconds, the secretary’s telephone will start to ring.
If the executive activates a substitute function with the secretary as the substitute, calls for call number 10 will
be indicated on the executive’s telephone by an optical signal only, but signalled acoustically on the
secretary’s telephone. The secretary can also activate a substitute function. Calls for call number 11 are then
signalled acoustically on the executive’s telephone, and indicated by an optical signal on the parallel
telephone and the secretary’s telephone.