T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 88 / 200

86
Configuration Examples Comfort Pro S in a LAN with an IP-enabled Server
3. In the Devices selection, change to the with configured MAC only setting.
4. Confirm with Apply .
By activating the limitation to specific devices, only known devices can get a DHCP answer. For this, the IP
address is taken from the address range used for dynamic address allocation. If you setup a new VoIP device,
it is sufficient to enter only the MAC address.
DNS Name Resolution
In a LAN with an IP-enabled server, the latter is also responsible for DNS name resolution. If you want to start
the Configurator by entering a DNS name, you must link this name on the server with the IP address used by
the Comfort Pro S. For further information, refer to the server documentation.
N
Note: To access the Comfort Pro S under the same IP address after a restart, you must
specify this IP address permanently on a DHCP server. On a DHCP server it is possible
to link the MAC address of a network card with a specific IP address. You will find
details in the server documentation.
Internet Access
You can also use the Comfort Pro S as an Internet access server in a LAN with an IP-enabled server. To do
this, you must enter the Comfort Pro S IP address on the server as the default gateway. In addition, you must
edit the internal DNS server configuration so that the resolution of external DNS names is forwarded to the
Comfort Pro S.
In this example, the Internet connection is established from a workstation computer via the server, which in
turn requests Internet access from the Comfort Pro S.
There are two different ways of suitably configuring the internal DNS server. You can enter the Comfort Pro S
IP address as a DNS forwarder. If you require access to extended DNS information, you can also configure the
DNS server for a recursive DNS request without the DNS forwarder. For further explanation, refer to the DNS
server documentation.