T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 79 / 200

77
Configuring the Comfort Pro S Configuration
Resetting the System Data
You can restore the factory settings of the Comfort Pro S in the Configurator. If this is not possible, refer to the
next section entitled Basic Hardware Settings Switch .
S
Please note: If this is done, all individual settings and the user data are then lost. For
this reason, you should back up your configuration regularly, the best time to do so
being after every change. For details, refer to the chapter entitled Saving and Loading
the Configuration starting on page 72 and to the Web console online help.
Proceed as follows:
1. In the Configurator, call up the System : Restart menu.
2. Click on Restart with Defaults .
3. Confirm this by pressing “OK” when the query dialogue box opens.
Basic Hardware Settings Switch
The Comfort Pro S configuration can also be returned to the factory settings by means of the basic hardware
settings switch.
S
Please note: If the factory settings are restored, all customer settings and user data
will be lost.
To restore the Comfort Pro S basic settings, proceed as described in the following paragraphs. For the
Comfort Pro S rack version note that the basic hardware setting switch is located on the front panel and can
be operated by using a pointed tool (please refer to the front panel figure in the chapter Mounting the
Comfort Pro S Rack InfoCom System starting on page 60).
1. Switch off the Comfort Pro S by disconnecting the power plug.
2. Remove the cover (see Opening and Closing Comfort Pro S ).
Caution!
Static charges can damage electronic devices. Observe the regulations regarding
electrostatically sensitive components.