T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 76 / 200

74
Configuration Configuring the Comfort Pro S
Forced Logoff of Another User by the Administrator
If the user “Administrator” logs in and another user with administration rights is already logged in, then the
administrator can forcibly log the other user off in order to configure. This functionality, for example can be
used, when configuring remotely, when a user has forgotten to log out.
In order to forcibly log a user off:
1. The “Administrator” user logs-in with the administration password.
2. They open the Configurator .
A message shows which user is currently configuring the system.
3. The administrator clicks on the Take over config rights button.
The other user can make no further modifications of the configuration.
Codes for IP Configuration
The IP configuration of the Comfort Pro S is performed on the Web console in the Configurator , in the
Network: LAN menu.
In the event that the IP configuration of the Comfort Pro S has to be changed and access via the Web console
is not possible, you can also use a code digit procedure to change these basic settings. Entry can be made
from an analogue telephone, an ISDN telephone and from system telephones.
Set IP Address
H *182 Z
(system PIN)
*
Z
(www)
* Z
(xxx)
* Z
(yyy)
* Z
(zzz)
#
Set NET Mask
H *183 Z
(system PIN)
*
Z
(www)
* Z
(xxx)
* Z
(yyy)
* Z
(zzz)
#
Example
Enter:
H*182
0000*192*168*99*254#
If required, initiate a system restart with the following procedure: