T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 121 / 200

119
Connections PBX Networking
PBX Networking
Comfort Pro S provides all the features necessary for PBX networking. You need PBX networking in the
following cases:
■
To operate the Comfort Pro S as a subsidiary system on another PBX. This will also allow you to use the
Comfort Pro S as a DECT server, for example.
■
To network several Comfort Pro Ss into a PBX system.
■
To use flexible configuration possibilities of trunk lines for a Comfort Pro S.
All settings that affect the configuration of PBX networking can be found in the Configurator menu
Telephony: Trunks and in the Telephony: Settings dialogue under QSIG linking . Refer also refer to the
corresponding help topics in the Comfort Pro S online help.
You can use ISDN point-to-point connections (Q.SIG or DSS1 protocol) or IP connections (Q.SIG-IP protocol)
for TK system networking.
N
Note: If you do not need the features of PBX networking, the simplified configuration is
sufficient in most cases. For this purpose, assign the preconfigured bundles (bundles)
Multi-terminal access or System access to the ports. The preconfigured route called
External trunk now makes it possible to seize an external line immediately or by first
dialling the prefix “0”. You can rename the preconfigured bundle and the
preconfigured route if required, but you cannot delete them.
Connections
Networking two or more TK systems means interconnecting them. The Comfort Pro S allows you to use the
following connections:
■
ISDN trunk lines
■
ISDN point-to-point connections (Q.SIG) on external S
0
ports
■
IP network connections (Q.SIG-IP)