T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 113 / 200

111
VoIP System Telephones Voice over IP (VoIP)
1. Configure the LAN’s DHCP server to ignore DHCP requests from the VoIP system telephones. With a
Linux DHCP server programme, you must, for example, include the following lines in the system file “/
etc/dhcpd.conf”:
group {
deny booting;
host 192.168.11.12 {
hardware ethernet 00:30:42:00:11:22;
}
}
Every DHCP service programme has similar options. You may need to reserve a free IP address for each
VoIP system telephone. You will find more details in your DHCP service programme’s online help or
handbook. The MAC address of all VoIP system telephones always begins with 00:30:42.
2. Configure a fixed IP address for the Comfort Pro S. To do this, call up the Configurator and open the
Network: LAN page. Click on the Change button.
3. Enter the current IP address configuration in IP address and Network mask . Confirm with Apply .
4. Configure the Comfort Pro S’s DHCP server to assign IP addresses. To do this, call up the Configurator
and open the Network: DHCP page. Click on the Change button.
5. From Status , select the address assignment option. Confirm with Apply . The DHCP page is re-displayed.
6. Add the configured VoIP system telephones to the list of IP addresses. Click on the New button.
7. Enter the VoIP system telephone’s IP address and MAC address . Enter the IP address reserved by the
DHCP service programme. Confirm with Apply .
Restart the Comfort Pro S and all connected VoIP system telephones.
t
Configuring multiple VoIP terminals can be facilitated by using dynamic address
assignment (please refer to Dynamic Address Assignment for Specific Devices
starting on page 85).