T-Comfort Comfort Pro S, Руководство по монтажу и пусконаладке

Страница: 83 / 200

81
Introduction to TCP/IP Configuration Examples
Introduction to TCP/IP
In a single LAN it is possible to use various protocols for the transmission of data. The connection between a
workstation computer and the Comfort Pro S runs via the IP protocol (also named TCP/IP) used on the
Internet. IP can be used together with other protocols (e.g. NetBEUI, AppleTalk or IPX/SPX) on the same
network.
Every device participating in data transmission using IP requires a unique IP address. An IP address consists
of four groups of digits from 0 to 255, each separated by a full stop. The supplementary protocols DHCP and
PPP automatically assign IP addresses to devices. Class C networks normally use IP addresses in which the
first three numbers are the same and the last number is uniquely assigned to a specific device in the LAN. On
the Internet, unique addresses assigned by a special organisation created for this purpose are used. Within a
LAN, you can use addresses which are not unique world-wide:
IP enables the establishment of connections via one or more intermediate stations. The decision whether to
connect directly or indirectly to the partner device depends on the network mask. The network mask for a
class C network is 255.255.255.0. If the IP address of the partner device does not fit the network mask, the
connection is established via the default gateway. If a device knows several data routes to different
intermediate stations, one speaks of a router.
IP server present
No DHCP server present
Special case when integrating the Comfort Pro S in
a LAN; settings in the Network: LAN menu must be
coordinated with the responsible system
administrator
IP Range Common Netmask Comment
192.168.0.0-192.168.255.255 255.255.255.0 256 smaller networks
172.16.0.0-172.31.255.255 255.255.0.0 16 medium networks
10.0.0.0-10.255.255.255 255.0.0.0 1 large network
Server configuration in the LAN Comfort Pro S Functions