Symantec SOFTWARE MANAGER 8.0 - REFERENCE FOR WISE PACKAGE STUDIO V1.0, Справочник

Страница: 180 / 302

Wise Package Studio Reference 180
Test Expert
d. Use the Edit button to change a test item configuration.
e. Use the Delete button to remove a test item.
4. To run the test item, select its check box and click Execute.
Execute Program
¾
Quality Assurance module only.
Use this test case to run any executable program. You can use WiseScript Editor,
WiseScript Package Editor, or another development environment to create a wide
variety of tests in executable form. If you build your own executable, build in a
mechanism into the .EXE to indicate whether the test passed or failed. This test case
appears for any package or group that you open, but it does not have any test items
until you add them.
To set up and run the test case
1. Select the Execute Program test case in the left pane of Test Expert.
2. Click Add.
The Execute Program dialog box appears.
3. Configure the test item:
a. In .EXE Path, enter the path to an executable file. If Test Expert will be used on
other computers, specify the executable with a UNC path.
b. In Command Line, enter command lines to apply to the .EXE.
c. Mark Make this a global test to have this test item appear for every package
or group that is subsequently opened in Test Expert. Otherwise it appears only
in the test plan of the currently opened package or group. Global tests are
stored in the repository and appear for all other users of the same repository.
d. Click OK to save the test item configuration.
e. Use the Edit button to change a test item configuration.
f. Use the Delete button to remove a test item.
4. To run the test item, select its check box and click Execute.
Application Verification Tests
¾
Quality Assurance module only.
In Test Expert, application verification tests examine the tables of a package and then
verify data and settings based on the contents. In some cases these tests are run
automatically, and in other cases, they require your visual verification of the test’s
success.
Requirements
z
The package must be installed on the testing computer.
z
The package must contain an .EXE that runs the application.