Sun Microsystems StorEdge L400, Инструкция по установке и эксплуатации

Страница: 144 / 162

D-4 Sun StorEdge L400 Installation and User’s Guide • April 1998
31 S AXIS FAILED HOME. The CHM
could not return to the home position
along the short axis. Open the door and look for anything that might be
obstructing the CHM gripper. Make sure the tape
library and the tape drives are not being used by the
host computer, then press reset on the operator
panel. If this error still occurs, contact your service
provider.
36 S LM629 Failure. The tape library
could not reset the servo chip for the
short axis. Make sure the tape library and the tape drives are
not being used by the host computer, then press
Reset on the operator panel. If this error still occurs,
contact your service provider.
38 CANNOT LOAD DRIVE. The CHM
could not load the cartridge into the
tape drive. (IT could not move in far
enough on the short axis). Open the door and look for anything that might be
obstructing the CHM along its short axis.
Make sure that a cartridge is not already loaded in
the tape drive.
Make sure that the flap on the cartridge is closed.
Make sure the library and tape drives are not being
used by any host, then press Reset on the operator
panel. If the error persists, contact your service
provider.
40 L AXIS DOES NOT MOVE. The CHM
could not move along the long axis. Open the door. Look for anything that might be
obstructing the CHM gripper.
Make sure the library and tape drives are not being
used by any host, then press Reset on the operator
panel. If the error persists, contact your service
provider.
41 L AXIS FAILED HOME. The CHM
could not return to the home position
on the long axis.
46 L LM629 RESET FAIL. The tape library
could not reset the servo chip for the
long axis. Make sure the tape library and the tape drives are
not being used by the host computer, then press
Reset on the operator panel. If the problem persists,
contact your service provider.
50 D AXIS DOES NOT MOVE. The drum
could not move on its axis. Open the door and look for any obstructions around
the drum. If there are no obstructions, contact your
service provider.
51 D AXIS FAILED HOME. The library
could not determine the home position
for the drum. Contact your service provider.
TABLE D-1
Hardware Errors by Error Code (Continued)
Error
Number Description Corrective Action