Sun Microsystems StorEdge L400, Инструкция по установке и эксплуатации

Страница: 116 / 162

7-30 Sun StorEdge L400 Installation and User’s Guide • April 1998
7.5.5.1 Bar Code Label Information
The
Label Info
command displays bar code label information.
1. Select the
Library Info Menu
by pressing
↓
or
↑
, then Enter.
2. Select
Inventory Menu
by pressing
↓
or
↑
, then Enter.
3. Select
Label Information
by pressing
↓
or
↑,
then Enter.
4. Display information for each element index by pressing
↑
or
↓
.
The system displays this screen:
The following chart explains the information on the
Label Information
screen.
The Label Error field indicates whether the bar code was unable to read the cartridge
label.
ELEM LABEL, INX= 0:
Label:
Valid/Error: 0/0
Send Vol Match: 0
↓
INX Element index for which information is being displayed.
Label If the element location contains a bar code that has been scanned, the
Label field contains the cartridge label.
Label Valid
1
0 Indicates whether the field is accurate:
Label field is accurate.
Label field is not accurate.
TABLE 7-8
Label Error Field Error Messages
Error
Code
Description
0 Bar code scan was successful, a reset condition occurred, or the door
was open.
60 The bar code scanner could not read the bar code label because there
was no label on the cartridge.
61 The bar code scanner could not read the bar code label because the label
was unreadable.