Sun Microsystems StorEdge L400, Инструкция по установке и эксплуатации

Страница: 133 / 162

Appendix B Modifying the
st.conf
File B-3
B.1.3 Configuration Values
The third section contains the values that will be used to configure the tape devices.
It has lines like:
The part of the line before the equal sign (=) is the string that is linked to the values
that will be used to configure a tape device. The second part of the line contains the
configuration values. These values are well defined in the
st
man page.
If you look at the first two examples in the Tape Device Identifiers section, you will
see that both the
ARCHIVE Python 28454
and the
ARCHIVE Python 29279
lines
end with the string
ARCH_Python
. This means that the operating system will
configure both tape devices according to the parameters set in the
ARCH_Python
line.
Note –
Each line in the configuration section must start with a unique string. Also,
each line in this section ends in a semi-colon(;).
B.2 Modifying the
st.conf
File
Read this entire procedure before editing the
st.conf
file.
Note – The syntax is critical. Verify the placement of commas, semicolons, and
beginning and ending quotation marks.
1. Become superuser.
2. Make a copy of the original
st.conf
file as a backup (
st.conf.old
).
#ARCH_Python = 1,0x2c,0,0xde39,4,0x00,0x8c,0x8c,0x8c,3;
% su
Password:
#
#cp /kernel/drv/st.conf /kernel/drv/st.conf.old