Sun Microsystems StorEdge L400, Инструкция по установке и эксплуатации

Страница: 134 / 162

B-4 Sun StorEdge L400 Installation and User’s Guide • April 1998
3. Edit the
st.conf
file.
Using an editor, scroll through the
st.conf
file to the following line:
a. Delete the
#
character that begins the line, if it hasn't already been removed.
b. Using the editor, continue to scroll until you come to the end of the “Tape
Device Identifiers” section.
The line will look something like:
c. On the next line, add the following entry exactly as shown:
Note – If multiple devices are enabled (lines uncommented) only the last
uncommented line with this format must end with a semicolon. All previous lines
with this format must end with a comma.
d. Using the editor, continue to scroll until you come to the end of the
“Configuration Values” section.
The line will look something like:
e. On the next line, add the following entry exactly as shown:
Note – All lines in this section end with semicolons.
f. Save and exit the file.
4. Continue the installation procedure.
#tape-config-list=
# "EXABYTE EXB8500C", "Exabyte 8500C Helical Scan", "EXB-850X",
"EXABYTE EXB-8900","Exabyte Mammoth","mam-data";
# "EXB-850X = 1,0x29,0,0xce39,4,0x14,0x15,0x8c,0x8c,1;
mam-data=1,0x29,0,0x1de39,1,0x7f,0;