Sun Microsystems StorEdge L400, Инструкция по установке и эксплуатации

Страница: 85 / 162

Chapter 6 Operating the Tape Library 6-13
1. Select the LCD interface mode.
2. Select Maintenance Menu, press enter.
3. Scroll to Diagnostics, press enter.
4. Scroll to Position to Element, press enter.
5. Select a number, press enter.
Cartridge slot numbers are 1 through 20.
6. Scroll to Move Cartridge.
Drive numbers are 82 and 83.
The fourth method is the manual mode. The manual method involves opening the
front door of the unit and placing tapes directly into the internal drives by hand.
This is recommended in the event of a failure of the robotic unit.
6.10 How to Set Up Solstice Backup
The options of Solstice Backup (formerly Networker) are fairly complicated. To run
this library effectively you need the Turbo version of Solstice and a jukebox module
and enabler. Consult your sales representative for the complete list of the options.
The tape library offered by Sun is based on the Exabyte EXB-220 product. Select the
“EXB-210” device in the Solstice Backup device menu.
The software allows use of either a software or hardware data compression scheme.
You should never use the two compression methods at the same time. If you use the
Networker software command you must specify non-data compression format to the
drive (
/dev/rmt/0l
or
0m
). Alternately, you can not use the Networker data
compression and specify the drive’s data compression mode (
/dev/rmt/0h
). One
disadvantage of this approach is the data format on the tape is not readable by the
earlier 8500 or 8200 drives because they do not incorporate data compression.