Sun Microsystems StorEdge L400, Инструкция по установке и эксплуатации

Страница: 124 / 162

8-2 Sun StorEdge L400 Installation and User’s Guide • April 1998
2. Select Clean Drive 1 from the Utilities Menu if you plan to clean the left drive, or
Select Clean Drive 2 if you plan to clean right drive.
■
The CHM picks the cleaning cartridge from the fixed slot and places it in the tape
drive.
■
The CTS automatically performs the cleaning cycle and ejects the cartridge when
it is finished.
■
The CHM picks the cartridge from the tape drive and places it back in the fixed
slot.
You can clean a tape drive inside the tape library in one of several ways:
■
As described above, by installing a cleaning cartridge in the fixed cartridge slot
and using the Clean Drive 1 or Clean Drive 2 options from the Maintenance Menu
on the LCD.
■
By installing a cleaning cartridge in the removable cartridge holder (preferably
the fixed slot) and using SCSI commands to automate the cleaning process.
■
By opening the front door and manually inserting a cleaning cartridge into the
tape drive. The CTS automatically ejects the cleaning cartridge when finished.
Note – It may take up to two minutes for a cleaning cartridge to complete its
function.
8.3 Caring for Tape Cartridges
When handling and storing tape cartridges:
■
Keep them away from anything magnetic.
■
Store them in a clean, dust-free environment.
■
Store them by putting them on their edge.
■
Keep them out of direct sunlight and away from sources of extreme heat, cold, or
humidity.
■
Make sure the cartridge is at the same temperature as the drive before using it.
■
Never open the tape access door on the cartridge and touch the surface of the
tape