manualshive.com logo in svg

Stryker InTouch FL27 series, Руководство по обслуживанию, Страница: 89 / 252

Поделиться
Скачать
Stryker InTouch FL27 series Скачать руководство пользователя страница 89

Return To Table of Contents

www.stryker.com

2141-209-002 REV H

89

Service Information

Tools Required:

 

•  Needle-Nose Pliers
•  Pry Bar or 2 x 4
•  Diagonal Pliers

Procedure:

1.  Plug bed into wall outlet.
2.  Position the bed height in the middle range.
3.  Remove the center base cover then remove the Zoom® drive actuator cover and set aside.
4.  Using Needle-nose pliers, remove the two rue clips from the clevis pins securing the actuator to the base frame.
5.  Using diagonal pliers, cut the zip ties securing the actuator cable and then unplug the actuator from the quick 

connect.

6.  Using a pry bar or a 2 x 4, pry upward on the Zoom® drive actuator frame and push the actuator clevis pins out.
7.  Remove actuator.
8.  Reverse steps to install new actuator.
9.  Test all bed functionality prior to putting bed back into service.

ZOOM

®

  DRIVE ACTUATOR REMOVAL AND REPLACEMENT (2141 MODEL ONLY) - (BASE)

Содержание InTouch FL27 series





























































































































































































































































Отзывы:

Нет отзывов