manualshive.com logo in svg

Stryker InTouch FL27 series, Руководство по обслуживанию, Страница: 88 / 252

Поделиться
Скачать
Stryker InTouch FL27 series Скачать руководство пользователя страница 88

Return To Table of Contents

88

2141-209-002 REV H

www.stryker.com

Service Information

FOOT ACTUATOR REMOVAL AND REPLACEMENT - (LITTER)

Tools Required:

 

•  Needle-Nose pliers
•  Diagonal Pliers
•  Phillips Screwdriver #2
•  Jack Stand

 

 

 

 

 

 

 

 

 

Procedure:

1.  Plug bed into wall outlet.
2.  Set the brakes by using one of the brake control locations or the manual brake pedal.
3.  Remove the mattress and set aside.
4.  Using a jack stand, support the foot section by lowering the bed height down enough to take the tension off the 

actuator mounting pins (reference drawing above).

5.  Using diagonal pliers, cut the zip ties securing the actuator cable to the bed.
6.  Remove the mattress assembly or fold back to expose the foot section.
7.  Using a Phillips screwdriver, remove the two screws (reference drawing above, item A and B) securing the 

electrical cover from the foot section and remove the cover. 

Note:  Use caution as the cover is large and heavy.

8.  Unplug the actuator from J1 and feed cable down to actuator.
9.  Using needle-nose pliers, remove the two rue clips from the clevis pins holding the actuator in place.
10.  Holding the actuator with one hand, remove the clevis pins securing the actuator to the bed then remove the 

actuator.

11.  Reverse these steps to reinstall. 

Note:  If new motor shaft does not line up with mounting holes, mount the base of the actuator then plug the  
actuator in and run it electrically in or out until lined up.

12.  Test all bed functionality prior to putting bed back in service.

Step #4:

 

Locate Jack Stand between floor 
and underside of Foot Frame.

Floor

Fo

ot

He

ad

 A

 B

Electrical Cover

Содержание InTouch FL27 series





























































































































































































































































Отзывы:

Нет отзывов