Stryker InTouch FL27 series, Руководство по обслуживанию, Страница: 55 / 252

Return To Table of Contents
www.stryker.com 2141-209-002 REV H 55
Troubleshooting
Problem / Failure Recommended Action
No Trendelenburg Motion. 1. Check the touch screen trend angle display for accuracy of the level
of the litter.
I. If not accurate, recalibrate the bed (refer to the Bed
Calibration procedures located on page 25 ).
a. If recalibration does not work, replace the trend angle
sensor and recalibrate.
b. If replacement of the trend angle sensor did not
resolve
the problem, replace the CPU/Power board.
No Reverse Trendelenburg Motion. 1. Check the touch screen trend angle display for accuracy of the level
of the litter.
I. If not accurate, recalibrate the bed (refer to the Bed
Calibration procedures located on page 25 ).
a. If recalibration does not work, replace the trend angle
sensor and recalibrate.
b. If replacement of the trend angle sensor did not
resolve
the problem, replace the CPU/Power board.
No Cardiac Chair Motion. 1. Check the touch screen fowler and foot section angle display for
accuracy of the angle of the fowler and foot section.
I. If not accurate, recalibrate the bed (refer to the Bed
Calibration procedures located on page 25 ).
a. If recalibration does not work, replace the fowler or
foot
section angle sensor depending on the one which was
not accurate, then recalibrate.
b. If replacement of the fowler or foot section angle
sensor did not resolve the problem, replace the CPU/
Power board.
HOB 30
0.
1. Check the touch screen fowler angle display for accuracy of the
angle of the fowler.
I. If not accurate, recalibrate the bed (refer to the Bed
Calibration procedures located on page 25 ).
a. If recalibration does not work, replace the fowler angle
sensor and recalibrate.
b. If replacement of the fowler angle sensor did not
resolve the problem, replace the CPU/Power board.
BED TROUBLESHOOTING