Stryker InTouch FL27 series, Руководство по обслуживанию, Страница: 39 / 252

Return To Table of Contents
www.stryker.com 2141-209-002 REV H 39
Maintenance Menu Guide
INTOUCH CONFIGURATION SCREEN (CONTINUED)
E. Bed Options Configuration
Access the configuration screen as shown on page 24 . Once in the configuration screen, follow the steps below to
access the options screen or the serial number screen.
To access the Bed Options screen:
1. Press and hold the HOB 30 button and the BRAKE button at the same time for 5 seconds, then release both
buttons. The Bed Options screen (Figure 34) will be displayed.
NOTE: When the European Community message window displays, push the Close button to close out
of the message. That is not applicable in this configuration.
2. Select all of the options shown on the Bed Options screen that apply to the bed configuration then, press Continue .
NOTE: In Figure 34, the options selected are iBed, iAudio, iDoc and Wi-Fi. All of the options selected will turn
green.
3. After pressing Continue in step 2, a confirmation screen
as shown in Figure 35 will be displayed verifying the
options you selected.
a. If the options on the confirmation screen do not
match the options on the bed, press the Back
button.
b. If the options on the confirmation screen match the
options on the bed, press the OK button.
4. After pressing the OK button, the options will be saved
and the screen will return to the configuration screen.
Press the
Close button to close the configuration
screen.
5. After pressing the Close button, a cycle power screen
(Figure 38) will be displayed stating to cycle power on
the bed.
6. To cycle power on the bed, turn the battery disconnect
switch to OFF (O) then unplug the power cord from the
wall outlet. Plug the power cord back into the wall outlet
then turn the battery disconnect switch back
ON (|).
7. Test bed functionality prior to returning the bed into service.
Figure 34: Bed Options screen
Figure 35: Bed Options Confirmation Screen