manualshive.com logo in svg

Stryker InTouch FL27 series, Руководство по обслуживанию, Страница: 85 / 252

Поделиться
Скачать
Stryker InTouch FL27 series Скачать руководство пользователя страница 85

Return To Table of Contents

www.stryker.com

2141-209-002 REV H

85

Service Information

BED LIFT ACTUATOR (FOOT) REMOVAL AND REPLACEMENT - (BASE)

Tools Required:

 

•  Needle-Nose Pliers
•  Diagonal Pliers

Procedure:

1.  Plug bed into wall outlet.
2.  Raise head end siderails to full up position and ensure brakes are activated.
3.  Remove head end base cover by pulling up and out.
4.  Remove center base cover by pulling up and out.
5.  Using diagonal pliers, cut the zip tie securing the actuator cable to the base frame.
6.  Using Needle-nose pliers, remove the rue clips from the clevis pins securing the actuator.

 

 CAUTION

Do not remove the clevis pins.

7.  Lower the bed all of the way down so the litter is supported by the base litter stops.
8.  Using the bed up/down controls, tap the up or down button to remove tension on the clevis pins and remove clevis 

pins.

9.  Unplug the cable quick connect and remove the actuator.
10.  Reverse the steps to install the new actuator.
11.  Test all bed functionality prior to putting bed back in service. 

Содержание InTouch FL27 series





























































































































































































































































Отзывы:

Нет отзывов