Steca coolcept StecaGrid 1800, Инструкция по установке и эксплуатации

Страница: 91 / 164

Information
The menu item
Information
contains the following submenu
items.
n
Contact info
n
System info
(see Fig. left):
– Product designation
– Serial number of the inverter
– Information on the software and hardware versions of the
inverter (see example
①
in Fig. left)
– Inverter address
– Version of the operating instructions for the inverter
n Country setting
: Country that is currently set and country-
specific grid parameters; see also Ä
9.3, p. 141.
n
React. pwr. char. curve
: Reactive power characteristic
curve graph (only when prescribed for currently set country)
n
Network
: Network parameters, partially configurable under
Settings
▶
Network
–
DHCP status
: DHCP on/off
–
Link status
: Network connection state
–
IP address
: IP address of the inverter
–
Subnet mask
: Subnet mask of the inverter
–
Gateway
: IP address of the network gateway
–
DNS-Adresse
: IP address of the DNS server
–
MAC address
: Hardware address of the inverter
n
Result of the last self test (only when the configured country is
Italy)
3.3.3 Settings
Numerical settings
①
Designation of the numerical setting
②
Value to be set; the selected value to be set is highlighted in
black.
When performing numerical settings of remuneration and dates,
the following applies:
Remuneration
n
Possible currencies: £ (Pounds), € (Euros), kr (Krones), none.
n
The maximum value that can be set for remuneration is limited
for technical reasons. The remuneration must be set using dif-
ferent units as required. Example: Dollars instead of Cents (set
a currency of
none).
Date
When setting the month/year, a check is performed to ensure that
the selected day is valid. If not, then the day is automatically cor-
rected.
Example: 31.02.2011 is corrected to 28.02.2011.
GB
747.431 | Z08 | 2014-01-31 91