Steca coolcept StecaGrid 1800, Инструкция по установке и эксплуатации

Страница: 111 / 164

Country selection
———————————————————————————
NOTICE
The country can only be set once!
———————————————————————————
1. Press
rs to select a country.
2. Press
SET
.
3. Press
ESC
; the dialogue shown at the left is displayed.
4. Press
ESC
to select a different country by performing step 1
and step 2, or
Press
SET
for a longer period of time (> 1 s) to confirm the
currently selected country. The check list is shown.
Reactive power characteristic curve
1. Press rs to select the type of reactive power characteristic
curve corresponding to the local regulations.
2. Press
SET
. The reactive power characteristic curve type is
adopted.
3. Press
ESC
. The check list is shown.
Number of nodes
1. Press
SET
. The value flashes.
2. Press
rs to change the number of nodes.
3. Press
SET
. The value is adopted.
4. Press
ESC
. The check list is shown.
Node
n
1. Press
rs to select a parameter for the node.
———————————————————————————
Notice
P %
cannot be changed at the first and last nodes (
000 %
,
100 %
).
———————————————————————————
2. Press
SET
. The parameter value flashes.
GB
747.431 | Z08 | 2014-01-31 111