Steca coolcept StecaGrid 1800, Инструкция по установке и эксплуатации

Страница: 93 / 164

Backlighting
n
off
n
automatic
: switches on for 30 seconds when a button is
pushed
n
Grid feed
:
– Not feeding: switches on for 30 seconds when a button is
pushed; then switches off
–
Feeding: switches on for 30 seconds when a button is
pushed; then dims
TCP/IP network
Notice
–
A prerequisite for this is that you know the parameters required for setting up the TCP/IP net-
work connection. Consult (further) technical professionals if required.
–
DHCP is activated in the device ex-works. This allows automatic integration of the device in
most networks.
Network settings, required for network communication, e. g. with
an Internet portal:
n
DHCP
: Switch DHCP on/off
n
IP address
: IP address of the inverter
n
Subnet mask
: Subnet mask of the inverter
n
Gateway
: IP address of the network gateway
n DNS-Adresse
: IP address of the DNS server
n Connection test
: Tests the Internet connection and then
displays the result
3.3.4 Service menu
The following section describes the service menu items. Some items have password protection; see
also Fig. in Ä
5.1, p. 115. You can obtain the password from our technical support department;
see
Ä
p. 145.
ATTENTION!
Risk of reduced yields. Inverter and grid parameters can be changed in the service menu. The
service menu may only be used by technical professionals who can ensure that the changes do not
contravene the applicable regulations and standards.
GB
747.431 | Z08 | 2014-01-31 93