Steca coolcept StecaGrid 1800, Инструкция по установке и эксплуатации

Страница: 89 / 164

Status display
The status display shows the following values:
3 4
22
7 8
9
5 6
1
F
①
Measurement name
②
Measurement with units
③
Date
④
Symbol Non-confirmed event messages; more information
on this is provided in Section Ä
7, p. 128.
⑤
Animated Connect symbol with 2
‑
digit inverter address;
indicates data traffic on the RS485 bus.
⑥
Symbol
Derating
⑦
Symbol Fixed voltage mode activated
⑧
Time
⑨
IP address of the device when a network connection has
been established, display alternates with
③
–
⑦
The following applies to the status display:
n The measurements shown in the status display are defined
under
Settings
▶
Meas. values
. Some measurements are
always displayed (default setting).
n
Current values are not displayed at night (solar irradiation too
low; example in Fig. left).
n
The
CO2 saving
shown in the status display are calculated
using the savings factor
508 g/kWh.
Numeric yield (day, month, year)
Daily, monthly and annual yields can be displayed numerically in a list.
①
Yield period (day/month/year)
②
Individual yields with period and value (1 per row)
The yield periods contain the following numbers of individual
entries:
Day yield: Last 31 days 1)
Monthly yield: Last 13 months
1)
Annual yield: Last 30 years 1)
1)
A yield value of 0 is shown when the inverter was not yet
installed at that time.
GB
747.431 | Z08 | 2014-01-31 89