Steca coolcept StecaGrid 1800, Инструкция по установке и эксплуатации

Страница: 117 / 164

Displaying yields numerically (list) and graphically (chart)
✔
The status display is shown.
1. Press
‘SET’ . The main menu is displayed with ‘Yield’ selected.
2. Press
‘SET’ . The list with yield time periods is shown.
3. Press
rs to select a yield time period.
4. Press
‘SET’ . The individual yields for the yield time period are
shown in a list (Fig. left).
5. Press
rs
to select an individual yield value.
6. Press ‘SET’ . The selected individual yield is shown in a chart
(Fig. left).
7. Press
rs
to page through the charts.
8. Press ‘SET’ to return to the list.
Editing selection lists containing check boxes
✔
A selection list with check boxes is displayed (Fig. left).
1. Press rs to select a check box.
2. Press
‘SET’ . The state of the check box changes from on to off
and vice-versa (preset check boxes cannot be changed).
3. Repeat steps 1 and 2 for further check boxes as required.
4. Press
‘ESC’ . The changes are adopted and the next higher
menu level is displayed.
Editing selection lists containing radio buttons
✔
A selection list with radio buttons is displayed (Fig. left).
1. Press
rs
to select a radio button that is currently switched
off.
2. Press
‘SET’ . The selected radio button is switched on and the
previously switched on radio button is switched off.
3. Press
‘ESC’ . The changes are adopted and the next higher
menu level is displayed.
Changing numeric settings
✔
A numeric setting is displayed (example Date in Fig. left).
1. Press
SET
. The selected value flashes ( Day in Fig. left).
2. Press
rs
to change the value.
3. Press
SET
. The change is adopted (value no longer flashes) or
Press
ESC
to cancel the change (value no longer flashes).
GB
747.431 | Z08 | 2014-01-31 117