Steca coolcept StecaGrid 1800, Инструкция по установке и эксплуатации

Страница: 109 / 164

n
The country set must always be the same as the country where the inverter is installed. This
causes the inverter to load the prescribed grid parameters for the selected country; more infor-
mation on this is provided in the
country table below.
n
The country can only be set once!
Contact your installer if you have set the wrong country.
n
Contact your installer if you cannot select the country where your inverter is installed.
n
The country setting does not affect the language used on the display. The display language is
set separately.
4.7.2 Operation
Starting initial commissioning
✔
The check list for initial commissioning is displayed:
n
The default display language is English.
n
The
Language
entry is selected.
n
The check boxes are not selected.
———————————————————————————
NOTICES
n
When a check list item is called up the corresponding
check box is automatically selected.
n
The following items are only displayed when the use of a
reactive power characteristic curve is prescribed for the
country currently selected in the
Country
item:
–
Reac. pwr. ch. c.
(type of reactive power char-
acteristic curve)
–
No. of nodes
1)
–
Node 1
1)
–
Node 2
1)
–
Node n
1) 2)
–
Display char. curve
1) : Is only displayed for reactive power characteristic
curve type
Enter char. curve
.
2) : Is only displayed when
no. of nodes
has been set
to a value > 2.
n
Initial commissioning is completed by calling up the
Finish
item.
n
Finish
can only be performed when all other check
boxes are selected.
———————————————————————————
1. Press
rs
to select a check list item.
2. Press
SET
to call up the item.
The items are described in detail below.
GB
747.431 | Z08 | 2014-01-31 109