FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
CHANNEL SELECTOR KNOB
The rotary knob is used to select channels and to choose menu items (such as the
DSC menu, radio setup menu, and DSC setup menu). The [UP (p)] / [DOWN (q)]
keys on the microphone can also be used to select channels and menu items.
Secondary
Use
While holding down the [SCAN (MEM)] key and turning the CHANNEL selector
knob, you can confirm memory channels for scanning.
KEYPAD
[16/9]
Key
Immediately recalls channel 16 from any channel location and automatically
selects high power. Pressing the [16/9] key again reverts to the previous selected
working channel.
Secondary
use
Press and hold the [16/9] key then press the [WX] key to switch between the USA,
Canadian and International Channel Groups.
[WX]
Key
Immediately recalls the previously selected NOAA weather channel from any
channel.
Secondary
use
Holding down the [16/9] key while pressing the [WX] key changes from USA,
International and Canadian channel groups.
[PA/FOG] Key (GX5000S)
Operates the 30 W PA function and/or the FOG HORN function when an external
horn and/or speaker is connected.
[SCAN (MEM)] Key (GX5000S)
Press this key to start and stop the scanning of programmed channels. Refer to
section “8.12 SCANNING” for details.
Secondary
use
To add a channel into the scan memory, select the channel and press and hold the
[SCAN (MEM)] key until “MEM” is shown on the display.
To delete a memorized channel from scan memory, select the channel and press
and hold the [SCAN (MEM)] key until “MEM” is removed from the display.
Vertex Standard Co., Ltd.
14
