FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
12.4 TIME LOCATION
This selection selects the time display between local time and UTC (time GPS sends to
radio). Time is displayed when GPS position (LAT/LON) is displayed by pressing and
holding the [H/L(NAV)] key.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Time Disp.” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “UTC” or “Local.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
In the local time mode, the display shows the time by the 12-hour system. Meanwhile, the
display shows the time by the 24-hour system in the UTC mode.
12.5 TRUE MAGNETIC CHANGE (NAV display)
This selection allows customizing the GPS COG (Course Over Ground) displayed on the
LCD to be in True or Magnetic.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Magnetic” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “On” (representing “Magnetic”) or “Off”
(representing “True”).
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
12.6 PRIORITY CHANNEL SET
Allows selection of the priority channel when priority scan is enabled.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Priority CH” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the channel to be a priority.
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
Vertex Standard Co., Ltd.
49
