Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 54

Страница: 54 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

SQUELCH CONTROL (SQL)

Activates the squelch adjusting mode.

Press this key to activate the squelch adjusting mode. Press the microphone’s [p] or

[q] key to adjust the squelch.

VOLUME KEY (VOL)

Activates the volume adjusting mode.

Press this key to activate the volume adjusting mode. Press the microphone’s [p] or

[q] to adjust the volume.

POWER SWITCH (PWR)

Press and hold down this key to turn to the transceiver and RAM+ Mic on and off.

PTT (Push-To-Talk) SWITCH

Activates transmission.

[H/L] KEY

Toggles between high and low power. When the [H/L] key is pressed while the

transceiver is on channel 13 or 67, the power will temporarily switch from LO to HI

power until the PTT is released. The [H/L] key does not function on transmit inhibited

and low power only channels.

[p](UP)/[q](DOWN) KEY

These keys are used to select channels, adjust the volume and squelch level, and to

choose the item selection of different functions (such as the DSC operation). In many

ways, these keys emulate the function of the transceiver’s CHANNEL selector knob.

[16/9] KEY

Immediately recalls channel 16 from any channel location. Holding down this key

recalls channel 9. Pressing the [16/9] key reverts to the previous selected working

channel.

Secondary use

Please see secondary use for the [WX] and [MEM] key.

KEY PAD

[SCAN (CLR)] Key

1. Starts and stops scanning of programmed channels.

2. If held while the [UP (p)] or [DOWN (q)] key on the microphone are pressed, the

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды