Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 22

Страница: 22 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

10.6 NOAA WEATHER CHANNELS

NOTE

NOAA Weather channels are available in the waters of USA and Canada only.

1. To receive a NOAA weather channel, press the [WX] key from any channel. The

transceiver will go to the last selected weather channel.

2. Turn the CHANNEL selector knob on the radio or [UP(p)] / [DOWN(q)] keys on the

microphone to select a different NOAA weather channel.

3. To exit from the NOAA weather channels, press the [WX] key. The transceiver returns

to the channel it was on prior to a weather channel.

10.6.1 NOAA Weather Alert

In the event of extreme weather disturbances, such as storms and hurricanes, the NOAA

(National Oceanic and Atmospheric Administration) sends a weather alert accompanied by

a 1050 Hz tone and subsequent weather report on one of the NOAA weather channels.

When the Weather Alert feature is enabled (see section “10.10 WX ALERT”), the

transceiver is capable of receiving this alert if the following is performed:

1. Program NOAA weather channels into the transceiver’s memory for scanning. Follow

the same procedure as for regular channels under section “9.12 SCANNING.”

2. Press the [SCAN (MEM)] key once to start memory scanning or priority scanning

(determined from the “10.7 SCAN TYPE” section, see page 60 for details).

3. The programmed NOAA weather channels will be scanned along with the

regular-programmed channels. However, scanning will not stop on a normal weather

broadcast unless a NOAA alert is received.

4. When an alert is received on a NOAA weather channel, scanning will stop and the

transceiver will emit a loud beep to alert the user of a NOAA broadcast.

5. Press the [WX] key to stop the alert tone and receive the weather report.

NOTE

If the [WX] key is not pressed the alert tone will be emitted for 5 minutes and then the

weather report will be received.

NOTE

The Weather Alert feature is also engaged while the transceiver is receiving on one of the

NOAA weather channels.

10.6.2 NOAA Weather Alert Testing

NOAA tests the alert system every Wednesday between 11AM and 1PM. To test the

GX5000S/GX5500S’s NOAA Weather alert feature, on Wednesday between 11AM and

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды