Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 44

Страница: 44 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

NOTE

If the GX5000S/GX5500S does not receive position data from the polled vessel, the LCD

will show “NO POSITION DATA.”

Manual Request

You may enter an MMSI number manually to contact without the Setting up the Individual /

Position Call Directory.

1. Press the [CALL (MENU)] key. The “DSC Operation” menu will appear in the display.

2. Turn the CHANNEL selector knob to select “POS Request.”

3. Press [ENT] key to show the Position request directory. This directory uses the

INDIVIDUAL Directory information.

4. Turn the CHANNEL selector knob to select “Manual,” then press the [ENT] key.

5. Turn the CHANNEL selector knob to scroll through numbers, 0-9. To enter the

desired number and move one space to the right press the [ENT] key. Repeat this

procedure until all nine space of the MMSI number which you want to contact are

entered.

6. If a mistake was made entering in the MMSI number repeat pressing the [H/L(NAV)]

key until the wrong nunber is selected, then move the channel knob to correct the

entry.

7. When finished entering the MMSI number, press and hold the [ENT] key.

8. Press the [ENT] key to transmit the position request DSC call.

9. When the GX5000S/GX5500S receives the position from the polled vessel it is

shown on the radio display and also transferred to the GPS Chart plotter.

10.If the GX5000S/GX5500S does not receive a reply, the display will be as shown in

the illustration on the right. To send again, press the [ENT] key.

11.8.3 Receiving a Position Request

When a position request call is received from another vessel, a ringing alarm will sound and

POS REQUEST will be shown in the LCD. Operation and transceiver function differs

depending on “POS Reply” in the “DSC Setup” menu setting.

Automatically reply:

1. When a position request call is received, a calling alarm sounds 4 times. Then

requested position coordinates are transmitted automatically to the vessel requesting

your vessels position.

2. To exit from position request display, press any key.

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды