Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 28

Страница: 28 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

(LAT/LON), when connected to a GPS receiver.

1. Press and hold the [H/L(NAV)] key, display the position information on the LCD. If the

GPS receiver is not receiving a fix, the display will be as shown in the illustration on

the right.

NOTE: When Ch16 is selected only lat/lon will shown.

2. To hide the position information, press and hold the [H/L(NAV)] key again.

10.15 INTERCOM OPERATION

Connecting a CMP25 RAM+ or VH-310 handset to the GX5000S/GX5500S allows intercom

communications. Refer to section “11.3 INTERCOM OPERATION” for CMP25 RAM+

Microphone or section “12.3 INTERCOM OPERATION” for VH-310 Handset.

10.15.1 Communication

1. Press and hold the [DW(IC)] key, the mode is changed to “INTERCOM” mode.

2. If your GX5000S/GX5500S is equipped with two CMP25 RAM+ Mic’s (or VH-310

Handset), select the companion you wish to communicate (Ram1, Ram2, or ALL)

with the CHANNEL selector knob, then press the [ENT] key.

When the “INTERCOM” is activated, “Intercom” is displayed on the

GX5000S/GX5500S, and “IC” is displayed on the CMP25 RAM+ Mic or VH-310

Handset.

4. Press the PTT switch. “Talk” will be shown on the display.

NOTE: A warning beep will be emitted when the GX5000S/GX5500S microphone’s

PTT switch is pressed while the RAM+ Mic’s or VH-310 Handset’s PTT switch is

pressed.

5. Speak slowly and clearly into the microphone, hold the microphone about 1.5 cm

away from your mouth.

6. When finished, release the PTT switch.

7. To exit the “INTERCOM” mode and return to radio operation mode, press the [16/9]

or [CLR] key.

10.15.2 Calling

While in INTERCOM mode, pressing and holding the [DW(IC)] key on the

GX5000S/GX5500S, CMP25, or VH-310 will produce a calling beep at the other station.

NOTE

When both CMP25 RAM+ microphones (or VH-310 Handset) are intercom mode, the

GX5000S/GX5500S will be temporarily disabled until the RAM+(s) exit the RAM+ to RAM+

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды