Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 21

Страница: 21 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

1. Perform steps 1 through 6 of RECEPTION.

2. Before transmitting, monitor the channel to ensure it is clear.

3 Press the PTT (push-to-talk) switch. The “” indicator in the LCD is displayed.

4. Speak slowly and clearly into the microphone.

5. When the transmission is finished, release the PTT switch.

NOTE

This is a noise-canceling microphone. The oval slot on the bottom of microphone should

be positioned within 1.5 cm from the mouth for optimum performance.

10.3 TRANSMIT TIME - OUT TIMER (TOT)

When the PTT switch on the microphone is held down, transmit time is limited to 5 minutes.

This limits unintentional transmissions due to a stuck microphone. About 10 seconds before

automatic transmitter shutdown, a warning beep will be heard from the speaker(s). The

transceiver will automatically go to receive mode, even if the PTT switch is continually held

down. Before transmitting again, the PTT switch must first be released and then pressed

again.

NOTE

When a transmission was shut down by the TOT, the GX5000S/GX5500S can not transmit

afterwards for 10 seconds.

10.4 SIMPLEX/DUPLEX CHANNEL USE

Refer to the VHF MARINE CHANNEL CHART (page 91) for instructions on use of simplex

and duplex channels.

NOTE

All channels are factory-programmed in accordance with International, Industry Canada

(Canada), and FCC (USA) regulations. Mode of operation cannot be altered from simplex

to duplex or vice-versa.

10.5 INTERNATIONAL, USA, AND CANADA MODE

1. To change the modes, hold the [16/9] key and press the [WX] key. The mode

changes from International to Canadian to USA with each press of the [WX] key.

2. “INTL” will be displayed for International mode, “CAN” will be displayed for Canadian

mode, and “USA” will be displayed on the LCD for USA mode.

3. Refer to the VHF MARINE CHANNEL CHART (page 91) for allocated channels in

each mode.

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды