FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
Secondary use
Press the [F] key first then press the [1(DIM)] key to access the LCD Dimmer menu.
Refer to section “10.1 LAMP ADJUSTING” for details.
[2(MEM)] Key
When in radio mode, this key is used to directly select digit “2” in a channel number.
Secondary use
Press the [F] key first then press the [2(MEM)] key, memorize the selected channel
into the transceiver scan memory for scanning. When repeat the same procedures
([F] à [2(MEM)]), will delete the channel from the scan memory. Refer to section “8.12
SCANNING” for details.
[3(SCAN)] Key
When in radio mode, this key is used to directly select digit “3” in a channel number.
Secondary use
1)Press the [F] key first then press the [3(SCAN)] key to start and stop the scanning of
programmed channels. Refer to section “8.12 SCANNING” for details.
2)While holding down the [3(SCAN)] key and pressing the [p] or [q] key, you can confirm
memory channels for scanning.
[4(DW)] Key
When in radio mode, this key is used to directly select digit “4” in a channel number.
Secondary use
Press the [F] key first then press the [4(DW)] key to scan for voice communications on the
priority channel and another selected channel until a signal is received on either channel
(Dual Watch). Refer to section “8.11 DUAL WATCH (TO PRIORITY CHANNEL)” for details.
[5(IC)] Key
When in radio mode, this key is used to directly select digit “5” in a channel number.
Secondary use
Press the [F] key then press the [5(IC)] key to activate intercom function between
RAM+(s) or VH-310 handset(s). Refer to section “12.3 INTERCOM OPERATION” for
details.
[6(NAV)] Key
When in radio mode, this key is used to directly select digit “6” in a channel number.
Vertex Standard Co., Ltd.
61
