● Instruction Manual and
Warranty Information
Introduction
The B-Speech® TX4 offers the latest in
Bluetooth technology.
The B-Speech® TX4 transmits music data
from players which are not Bluetooth
capable (e.g.: MP3 and CD player, stereo
and other players) to a Bluetooth receiver
such as the stereo headset B-Speech®
Calypso or the speaker system
B-Speech® Twiddle.
The B-Speech® TX4 can be used with any
audio sources with a 3.5 mm audio output.
Normally the B-Speech® TX4 and a
Bluetooth receiver establish a connection
automatically, as if using "Plug and Play".
After being turned on, the transmitter
automatically scans,
then pairs and connects to the receiver.
Note: Please read about pairing in the
user guide of yourBluetooth receiver.
User Manual
Getting started
Turning B-Speech® TX4 on / off Normally, both devices only need
turning on after the pairing; everything else is done automatically.
Turning on: The B-Speech® TX4 is turned on by pressing on the
On / Off button. The blue LED lights up.
Turning off: Press the On / Off button for about 5 seconds; the blue
LED goes off.
Note:
Read the user guide of your Bluetooth receiver to find out how
to turn it on / off.
2 .Pairing
Pairing the B-Speech® TX4 with the receiver "Pairing" means making a wireless
connection between the transmitter and the Bluetooth receiver.
Before being able to use B-Speech® TX4 with a receiver, you need to pair them.
After being turned on, the transmitter automatically scans, pairs and connects to
the receiver.
Once pairing is established, both devices search for each other and connect
automatically whenever they are switched on.
Important note: B-Speech® TX4 pairs only with receivers which have a factory
PIN-Code equal to '0000', '1234' or '8888'.
1. On / Off switch
2. LED indicator
(under the cover)
3. 180° swivel 3,5 mm
connector
1. Connect the USB plug on the other end
of the cable charger to the USB input of
your PC, laptop or optional power supply.
2. Connect the cable charger mini USB
plug to the mini USB input of the
B-Speech® TX4. The red LED lights up
during charging.
3. When charging is done, the red LED
goes off.
4. Remove the cable charger.
GB
B-Speech® Stereo Transmitter TX4
B-Speech ® TX4
User Manual
package contents
TX4
Charging the Unit
Overview
share together not alone anymore
Visual indicators
State of the device and State of the LED
Pairing or Establishing a connection----The red and blue LED
flash alternatively
Connected and playing----The blue and red LED flash
simultaneously at slowly speed
Sleep mode----The blue LED flashes once every 5 seconds
1
3
2
