Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 31

Страница: 31 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

11.3.1 Transmitting a DSC Distress Alert

NOTE

To be able to transmit a DSC Distress Alert an MMSI number must be programmed, refer to

section “11.2.2 Programming the MMSI.”

In order for your vessels location to be transmitted either connect a GPS to the

GX5000S/GX5500S (refer to section “6.3 ACCESSORY CABLE”) or manually input your

position (refer to section “11.11 MANUALLY INPUTTING GPS LOCATION”).

1. Lift the red spring loaded DISTRESS cover, then press and hold the [DISTRESS] key.

The “DISTRESS” menu will appear on the LCD and the radios display will count

down (5-4-3-2-1) and then transmit the Distress Alert. The backlight of the LCD and

keypad flashes while the radios display is countdown.

2. When the distress signal is sent, CH70 and the “” icon will appear on the LCD.

3. The transceiver will watch for a DSC acknowledgment transmission on CH70 and

also receive calls on CH16.

4. If an acknowledgement is received, select channel 16 and advise your distress

situation.

5. If no acknowledgment is received, the Distress Alert is repeated at 4 minute intervals

until a DSC acknowledgment is received.

6. When a DSC Distress acknowledgment is received, a distress alarm sounds and

channel 16 is automatically selected. The LCD shows the MMSI of the ship

responding to your distress.

RECEIVED ACK:

acknowledgment signal is received.

RECEIVED RLY ACK: relay acknowledgment signal is received from another vessel

or coast station.

8. To cancel the DSC Distress alarm signal from the speaker, press any key.

Transmitting a DSC Distress Alert with Nature of Distress.

The GX5000S/GX5500S is capable of transmitting a DSC Distress Alert with the following

“Nature of Distress” categories:

Undesignated, Fire, Flooding, Collision, Grounding, Capsizing, Sinking, Adrift,

Abandoning, Piracy, MOB

1. Lift the red spring loaded DISTRESS cover and press the [DISTRESS] key. The

“DISTRESS” menu will appear on the LCD.

2. Turn the CHANNEL selector knob to select the desired nature of distress category.

3. Press and hold the [DISTRESS] key. The radios display will count down (5-4-3-2-1)

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды