Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 26

Страница: 26 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

and hold the [SCAN (MEM)] key for one second, “MEM” will disappear in the LCD.

5. To start scanning, just press the [SCAN (MEM)] key momentarily. “M-SCAN” appears

on the LCD. Scanning will proceed from the lowest to the highest programmed

channel number and will stop on a channel when a transmission is received.

6. The channel number will blink during reception.

7. To stop scanning, press the [16/9] or [WX] key.

10.12.3 Priority Scanning (P-SCAN)

In the default setting, Channel 16 is set as the priority channel. You may change the priority

channel to the desired channel from the Channel 16 by the Radio Setup Mode, refer to

section “10.6 PRIORITY CHANNEL SET.”

1. Adjust the SQL knob until background noise disappears.

2. Select a desired channel to be scanned using the CHANNEL selector knob. Press

and hold the [SCAN (MEM)] key (GX5000S) for one second, “MEM” will appear on

the display, which indicates the channel has been programmed into the transceivers

memory.

3. Repeat step 2 for all the desired channels to be scanned.

4. To DELETE a channel from the transceiver’s memory, select the channel then press

and hold the [SCAN (MEM)] key (GX5000S) until “MEM” is removed from the

display.

5. To start priority scanning, press the [SCAN (MEM)] key (GX5000S) momentarily.

“P-SCAN” appears on the LCD. Scanning will proceed between the memorized

channels and the priority channel. The priority channel will be scanned after each

programmed channel.

6. To stop scanning, press the [16/9] or [WX] key.

You may change the scan resume time in the Radio Setup Mode, refer to section “10.8

SCAN RESUME TIME.”

10.13 PA/FOG OPERATION

PA/FOG mode allows the transceiver to be used as a 30W hailer when an optional

STANDARD HORIZON 220SW or 240SW PA horn speaker is installed. When in Hail mode

the PA speaker Listen’s Back (acts as a microphone and amplifies sound to the front panel

speaker) through the PA horn speaker, which provides two-way communications through

the PA horn speaker.

NOTE

When in PA or FOG mode the GX5000S/GX5500S will receive on the last selected VHF

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды