Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 65

Страница: 65 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

14.5 DSC/RADIO SETUP MODE

The VH-310 Handset can access the DSC / RADIO setup menu (refer to section “9

DIGITAL SELECTIVE CALLING” and section “10 RADIO SETUP MODE” for details). The

CONTRAST, NAV DISPLAY, KEY BEEP, and AF SELECT menu item accessed from the

VH-310 Handset only controls the VH-310 Handset’s display and speaker.

DSC/RADIO Setup mode from the VH-310 Handset:

1. Press and hold down the [CALL (MENU)] key until “RADIO SETUP” menu appears.

2. Press the [p]/[q] key to select “RADIO SETUP” or “DSC SETUP” menu.

3. Press the [ENT] key, then select the menu item you wish to work on by pressing the

[p]/[q] key.

4. Press the [ENT] key.

5. Press the [p]/[q] key to change the value or condition for the menu item, then press

the [ENT] key to save the new setting.

6. Press the [p]/[q] key to select “EXIT,” then press the [ENT] key to return to the normal

operation.

RADIO

SETUP-menu

DSC

SETUP-menu

NOTE

When the SETUP menu is selected, using the VH-310 Handset, the GX5000S/GX5500S

will be temporarily disabled until the VH-310 Handset exits from the setup mode.

14.5.1 Changing GPS Information to Vessel position or COG

Allows customizing of the NAV data showing GPS Information. Factory default is “Your

Vessel’s Current Position,” however, following the steps below the GPS Information can be

changed to “Course Over Ground (COG).”

1. Press and hold down the [CALL (MENU)] key until “RADIO SETUP” menu appears.

2. Press the [ENT] key, then select “NAV DISPLAY” with the [p]/[q] key.

3. Press the [ENT] key.

4. Press the [q] or [p] key to select “Pos (Your Vessel’s Current Position)” or “Cru

(Course Over Ground).”

5. Press the [ENT] key to store the data entered, then press the [16/9] key to exit this

menu and return to radio operation mode.

14.5.2 External Speaker AF Selection

The AF SELECT menu allows you to set the audio output level of the VH-310’s External

Speaker to “fixed” regardress of the VOL level setting of the VH-310, which is useful when

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды