Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 64

Страница: 64 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

[q] keys, then press the [ENT] key.

3. When the “INTERCOM” operation is activated, “IC” is displayed on the VH-310

Handset (and RAM+ Mic, if used) and “INTERCOM” is displayed on the

GX5000S/GX5500S.

4. Press the PTT switch, “TALK” is displayed.

NOTE: A warning beep is emitted when the RAM+ Mic PTT switch is also being

pressed while the transceiver microphone’s PTT switch is pressed.

5. Speak slowly and clearly into the microphone, hold the microphone about 1.5 cm

away from your mouth.

6. When finished, release the PTT switch.

7. To exit the “INTERCOM” mode and return to radio operation mode, press the [F] key

followed by the [5(IC)] key again.

14.3.2 Calling

Press and hold the [5(IC)] key for 1 second when the “INTERCOM” operation is activated, a

calling beep is emitted from the GX5000S/GX5500S speaker.

14.4 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON)

You may send the Latitude/Longitude of your vessel manually from the VH-310 Handset

even if the GX5000S/GX5500S is not connected the GPS receiver unit.

After the position is entered, transmitting a DSC Distress, Position Request, or Position

Send will contain the manually entered position.

1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.

2. Press the [q] key to select “DSC SETUP” menu.

3. Press the [ENT] key, then select “POS INPUT” with the [p]/[q] key.

4. Press the [ENT] key then, enter the your local time from the keypad by the 24-hour

system on the UTC time.

5. Enter the Latitude of your vessel location (xx.xx.xx) by the keypad, then press the

[6(NAV)] key to select North (N), or [7(SCRM)] key to select South (S).

6. Enter the Longitude of your vessel location (xxx.xx.xx) by the keypad, then press the

[3(SCAN)] to select East (E), or [9(FOG)] key to select West (W).

7. If a number was entered by mistake, press the H/L key repeatedly to select the

number. Press the [p]/[q] key to select the desired number.

8. Press and hold in the [ENT] key to store the data entered, then press the [16/9] key

to exit this menu and return to radio operation mode.

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды