FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
12.10 WX ALERT
This selection allows the radios NOAA Weather alert to be turned off. Default setting is ON.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “WX Alert” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the desired WX alert mode. The WX alert
mode can be set to “On SCAN,” “On WX,” “On SCAN/WX,” or “Off.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
12.11 VOICE SCRAMBLER (Requires optional CVS2500 Scrambler Unit)
This menu is used to setup the channels to be scrambled and the scrambler code.
NOTE
This menu will not appear unless a CVS2500 is installed.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Scrambler” in the “Radio Setup” menu with the
CHANNEL selector knob .
3. Press the [ENT] key.
4. Select the operating channel to be scrambled with the CHANNEL selector knob.
5. Press the [ENT] key to store the selected channel.
6. Turn the CHANNEL selector knob to change the scrambler code. The scrambler code
can be set from “0” to “3” and “OFF.” When “OFF” is selected the voice scrambler is
disabled.
7. Press the [SCAN] key to store the scrambler code.
8. Repeat steps 4 and 7 to set other channels.
9. To exit this menu and return to radio operation mode press the [16/9] key.
Note: Voice Scrambler may not be activated on Channel 16 and 70.
12.12 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default name.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “CH Name” in the “Radio Setup” menu with the
CHANNEL selector knob.
Vertex Standard Co., Ltd.
51
