FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
12.7 SCAN TYPE
This selection selects the scan mode between “Memory Scan” and “Priority Scan.”
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “SCAN Type” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “Priority” or “Memory.”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
12.8 SCAN RESUME TIME
This selection is used to select the time the GX5000S/GX5500S waits after a transmission
ends before starting scanning.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “SCAN Resume” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the desired resume time. The resume
time can be set to “1sec,” “2sec,” “3sec,” or “Off.” In the “Off” selection, the scanner
will resume after the other station stops transmitting (carrier drops).
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
12.9 KEY BEEP (ON/OFF)
This selection allows the key beep to be turned off.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Press the [ENT] key, then select “Key Beep” in the “Radio Setup” menu with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “On” or “Off.”
5. Press the [ENT] key to set the key beep condition.
6. To exit this menu and return to radio operation mode press the [16/9] key.
NOTE
Emergency alarm and beeps for DSC operation cannot be turned OFF.
Vertex Standard Co., Ltd.
50
