Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 42

Страница: 42 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

1. When a group call is received, the GX5000S/GX5500S will produce a ringing alarm

sound.

2. The radio automatically switches to the requested channel.

3. Press any key to stop the alarm.

4. Monitor the channel for the person calling the Group for a message.

5. If you want to respond, monitor the channel to make sure it is clear, then press the

PTT on the mic and talk to the calling ship(s).

NOTE

When there is an unread Group Call, the “DSC” icon will blink. You may review the unread

Group Call from the DSC Log, refer to section “11.6.2 Reviewing Received Calls Logged

into the Call Waiting Directory.”

NOTE

After a Group call is received, the time the call was made and the ships MMSI or vessels

name will appear on the LCD.

11.8 POSITION REQUEST

Advancements in DSC have made it possible to poll the location of another vessel and

show the position of that vessel on the display of the GX5000S/GX5500S. Standard

Horizon has taken this feature one step further, if any Standard Horizon GPS is connected

to the GX5000S/GX5500S, the polled position of the vessel is shown on the display of the

GPS chart plotter making it easy to navigate to the location of the polled vessel. This is a

great feature for anyone wanting to know the position of another vessel. For example your

friend that is catching fish, or finding the location of a person you are cruising with.

NOTE

The other vessel must have an operating GPS receiver connected to its DSC transceiver

and must not have its transceiver set to deny position requests. (Refer the section “11.5.1

Setting up the Individual / Position Call Directory” to enter information into the individual

directory).

11.8.1 Setting up Position Reply

The GX5000S/GX5500S can be set up to automatically or manually send your position to

another vessel. This selection is important if you are concerned about someone polling the

position of your vessel that you may not want to. In the manual mode you will see the MMSI

or persons name shown on the display allowing you to choose to send your position to the

requesting vessel.

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды