Standard Horizon Quantum GX5000S Скачать руководство пользователя страница 43

Страница: 43 / 69

FCC ID: K6630283X3S

IC ID: 511B-30283X3S

GX5000S / GX5500S Operating Manual

1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.

2. Turn the CHANNEL selector knob to select “DSC Setup” menu.

3. Press the [ENT] key, then select “POS Reply” with the CHANNEL selector knob.

4. Press the [ENT] key.

5. Turn the CHANNEL selector knob to select “Auto” or “Manual.” In “Auto” mode, after

a DSC POS Request is received, the radio will automatically transmit your vessels

position. In “Manual” mode, the display of the GX5000S/GX5500S will show who is

requesting the position.

6. Press the [ENT] key to store the selected setting.

7. To exit this menu and return to radio operation mode press the [16/9] key.

The GX5000S/GX5500S has the capability to turn off the Position Request ringer.

1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.

2. Turn the CHANNEL selector knob to select “DSC Setup” menu.

3. Press the [ENT] key, then select “DSC Beep” with the CHANNEL selector knob.

4. Press the [ENT] key.

5. Turn the CHANNEL selector knob to select “POS Request.”

6. Turn the CHANNEL selector knob to select “Off.”

7. Press the [ENT] key to store the selected setting.

8. To exit this menu and return to radio operation mode press the [16/9] key.

If you wish to return to enabling the ringer tone, just repeat the above procedure, turning

the CHANNEL selector knob to select “On” in step “6” above.

11.8.2 Transmitting a Position Request to Another Vessel

Pre-Programmable Request

1. Press the [CALL (MENU)] key. The “DSC Operation” menu will appear in the display.

2. Turn the CHANNEL selector knob to select “POS Request.”

3. Press [ENT] key to show the Position request directory. This directory uses the

INDIVIDUAL Directory information.

4. Turn the CHANNEL selector knob to select a name, then press the [ENT] key.

5. Press the [ENT] key to transmit the position request DSC call.

6. When the GX5000S/GX5500S receives the position from the polled vessel it is

shown on the radio display and also transferred to the GPS Chart plotter.

7. If the GX5000S/GX5500S does not receive a reply, the display will be as shown in

the illustration on the right. To send again, press the [ENT] key.

Vertex Standard Co., Ltd.

Содержание Quantum GX5000S






































































Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды

Standard Horizon Quantum GX5000S, Руководство по эксплуатации

Результаты поиска

Содержание Quantum GX5000S

Отзывы:

Похожие инструкции для Quantum GX5000S

Бренды по названию

Популярные бренды