FCC ID: K6630283X3S
IC ID: 511B-30283X3S
GX5000S / GX5500S Operating Manual
test signal with the CHANNEL selector knob.
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select the “Individual” you want to send the test
signal or “Manual,” then press the [ENT] key.
6. If “Manual” is selected at the previous step, enter the MMSI number (nine digits)
which you want to send the test signal. To do this, turn the CHANNEL selector knob
to scroll through numbers “0-9,” the press the [ENT] key to move the entry location to
the right. If a mistake was made entering in the MMSI number repeat pressing the
[H/L(NAV)] key until the wrong number is selected, then move the channel knob to
correct the entry. When finished entering the MMSI number, press and hold the [ENT]
key.
7. Press the [ENT] key again to transmit the Test signal.
11.11 MANUAL INPUTTING GPS LOCATION (LAT/LON)
You may send the Latitude/Longitude of your vessel manually even if the
GX5000S/GX5500S is not connected the GPS receiver unit.
After the position is entered, transmitting a DSC Distress, Position Request, or Position
Send will contain the manually entered position.
1. Press and hold down the [CALL (MENU)] key until “Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC Setup” menu.
3. Press the [ENT] key, then select “POS Input” with the CHANNEL selector knob.
4. Press the [ENT] key. The transceiver will beep, and the display will be as shown in
the illustration on the right.
5. Enter the your local time by the 24-hour system on the UTC time. Use the [ENT] and
[H/L(NAV)] key to navigate to each column of the time, then use the CHANNEL
selector knob to select the desired numbers in each column. Repeat for each column,
to complete the time.
6. Enter the Latitude/Longitude of your vessel location with the same procedure as
description above.
7. To store the data entered, press the [ENT] key. To exit this menu and return to radio
mode press the [16/9] key.
12 RADIO
SETUP
NOTE
The optional CMP25 RAM+ mic and VH-310 Handset can also change the RADIO SETUP
menu. Refer to page 76 (RAM+ mic) and page 85 (VH-310) for details.
Vertex Standard Co., Ltd.
47
