Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 103 / 160

PDW-HD1500/V1 (E)
6-5
Screw with drop-safe
Flexible card wire
SE-852 board
CN1
Loader (P200)
assembly
Spindle motor
Top view
A
Right side rib
Left side rib
Top cover (A) assembly
Screws with drop-safe
5. Remove the top cover (A) assembly in the
direction of the arrow.
6. Release the lock by sliding portion A of
connector CN1 on the SE-852 board as
shown in the figure with tweezers or another
tool, and disconnect the flexible card wire.
m
.
Life of flexible card wire will be
significantly shortened if it is folded. Be
very careful not to fold it.
.
When reinstalling the removed parts, be
careful not to break the locking claws of
the connector CN1 of the SE-852 board.
7. Loosen the two screws with drop-safe on the
loader (P200) assembly.
8. Remove the loader (P200) assembly from the
rear side in the direction of the arrow.
m
.
Stepped shafts are inserted into the loader
(P200) assembly on both sides of the front.
Remove the loader (P200) assembly after
slightly pulling it toward the rear.
.
The spindle motor has an intense powerful
magnet. A part of the loader (P200)
assembly may be attracted by the magnetic
force or hooked on the edge of the spindle
motor. Be careful when removing the
loader (P200) assembly.