Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 15 / 160

1-7
PDW-HD1500/V1 (E)
1-4-3. Removing/Reinstalling the Rear Panel
1. Remove the top panel assembly.
(Refer to Section 1-4-1.)
2. Remove the six screws and remove the rear panel.
3. Reinstall the rear panel by reversing the steps of
removal.
1-4-4. Removing/Reinstalling Cabinet
1. Turn the PDW-HD1500 upside down.
2. Remove the five screws, and remove the bottom plate
assembly.
3. Reinstall the bottom plate assembly by reversing the
steps of removal.
[1]
[2]
PSW2
x
5
Gear
(black)
Rear side
Front side
Manual ejection
cover
1-5. How to Take Out a Cartridge
Manually
1-5-1. Manual Ejection with the Gear
When the power of the unit does not turn on or the loader
(P200) assembly does not operate, eject the cartridge in the
following steps.
1. Turn off the power of the unit.
2. Remove the top panel assembly.
(Refer to Section 1-4-1.)
3. Loosen the screw with drop safe that is fixing the
manual ejection cover, and remove the manual ejection
cover.
4. Turn the gear (black) in the direction of arrow [1] until
it stops.
m
.
Turn the gear (black) slowly without applying too
much force. Do not turn the gear beyond the place
where it stops.
.
If the gear (black) cannot be turned, the loader
(P200) assembly may be defective. Refer to “1-5-2.
Manual ejection when the gear is broken” described
later, and take out the cartridge.
5. Turn the gear (black) in the direction of arrow [2], and
take out the cartridge.
Rear panel
B3
x
6
Bottom plate
assembly
B3
x
6
B3
x
6
Bottom
side