Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 30 / 160

1-22
PDW-HD1500/V1 (E)
Adjustments After Repairing the HPR-23 Board
After the HPR-23 board is repaired, perform the following
adjustments after the re-settings above.
.
Perform the free-running frequency adjustment.
(Refer to Section 8.)
8-2. HD Free-Running Frequency Adjustment
8-3. SD Free-Running Frequency Adjustment
8-7. DC-IN
+
12V Adjustment
Re-setting After Replacing the NVRAM
.
System setting “SYSTEM SEL” of the unit
(Refer to the Operation Manual.)
.
Clip information “CLIP INFORMATION” setting
(Refer to the Operation Manual.)
.
Clip title preset number “NUMERIC of CLIP AUTO
TITLING” setting (Refer to the Operation Manual.)
.
Function menu setting (Refer to the Operation Manual.)
.
Current date and internal clock setting
1-12-3. DR-601 Board
Execute the adjustment in the following order after
replacing or repairing the DR-601 board.
1. Servo1 Automatic Adjustment (Refer to Section 7-2.)
2. Skew Adjustment (Radial Skew Adjustment only)
(Refer to Section 7-3-2.)
3. Servo2 Automatic Adjustment (Refer to Section 7-4.)
4. Clear media log (Refer to Section 7-5.)
1-12-4. SE-850 Board
This board includes EEPROM (IC4) that stores adjustment
data, hours meter data, and other data.
Replace IC4 after the SE-850 board is replaced.
Execute the following adjustment after replacing or
repairing the SE-850 board.
.
ACCELERATION OFFSET (Refer to Section 4-7-20.)
n
Execute the following menu only when the old IC4 was
not removed from the old SE-857 and not installed on the
new SE-857 board, or when only IC4 was replaced with
the new IC.
.
UPLOAD TO EEPROM (Refer to Section 4-7-25.)
1-12. Service Action After Replacing or
Repairing the Block and Board
n
The ROMs on the boards below contain firmware.
Upgrade the firmware to the latest version after replacing
any of the boards. (Refer to Section 1-10.)
.
HPR-23 board
.
DR-601 board
.
RX-93H board
.
SE-850 board
.
NET-4 board
.
KY-624 board
1-12-1. Optical Block Assembly
After replacing the optical block assembly, perform the
following adjustments in descending order.
(Refer to Section 7.)
.
Servo1 Automatic Adjustment (Refer to Section 7-2.)
.
Skew Adjustment (Refer to Section 7-3.)
.
Servo2 Automatic Adjustment (Refer to Section 7-4.)
.
Clear media log (Refer to Section 7-5.)
1-12-2. HPR-23 Board
Perform the following re-settings after replacing or
repairing the HPR-23 board or after replacing the NVRAM
(IC2907).
Re-setting After Replacing the HPR-23 Board
Perform the re-settings after replacing the NVRAM and
following re-settings after the HPR-23 board is replaced.
.
Default setting (Refer to the Operation Manual.)
.
Time code setting (Refer to the Operation Manual.)
.
Setup menu setting (Refer to the Operation Manual.)
.
Menu bank 1 to 3 “SETUP BANK” setting
(Refer to the Operation Manual.)
.
Serial number setting
For more information, contact your local Sony Sales
Office/Service Center.