Sony XDCAM PDW-HD1500, Руководство по обслуживанию

Страница: 123 / 160

PDW-HD1500/V1 (E)
6-25
7. Disconnect the four board-to-board connec-
tors connecting the MB-1113 board to the
HPR-23 board. Detach the HPR-23 board in
the direction shown by the arrow.
HPR-23 board
Four connectors
of MB-1113 board
Four connectors
(board to board)
6-12-9. HPR-23 Board, ENC-107
Board
Removal
1. Remove the top panel assembly and the
bottom plate assembly.
(Refer to Sections 1-4-1 and 1-4-4.)
2. Remove the IF-1073 board.
(Refer to Section 6-12-8.)
3. Remove the KY cable plate (GND) from the
chassis.
4. Disconnect the flexible card wire from the
connector CN2101, and disconnect the
harness from the connectors CN2109 and
CN2 to remove the flexible card wire outside
through the hole of the chassis.
5. Disconnect the harnesses from the connectors
CN1 and CN3.
6. Remove the four screws.
Flexible card wire
KY cable plate
(GND)
Flexible card wire
Harnesses
PSW2.6 x 6
CN2101
CN2109
CN2
CN1
CN3
HPR-23 board
Hole of chassis
CN3
Hole of chassis